• 0 Posts
  • 12 Comments
Joined 2 years ago
cake
Cake day: July 9th, 2023

help-circle
  • In essence, that is what she did. Her letter, which is an excellent read if you like detail oriented logical takedowns of transparent corruption, only “offers” her resignation, conditional to the AG refusing to meet with her to discuss the issues she raises in the letter.

    She says that dismissing the charges would be, in the first place, unethical, as the prosecution is based upon an indictment rendered faithfully by a grand jury. Furthermore no one (including Adam’s defense counsel) has called into question the conduct of the prosecution. In addition, dismissing the case would also be illegal, as legal precedence states that a court may decline the Government’s request to dismiss charges in instances which run contrary to the public interest. She concludes that, in light of those points, she cannot and will not comply with the request. At that point, she offers her resignation.

    Despite really enjoying reading her arguments, I’m certainly no law expert. I would imagine that she would open herself up to some pretty serious charges from the Department of Justice if she refused to comply with their order. I mean, considering the brazenness of the corruption on display by the very order she is protesting here, it wouldn’t shock me if she’s wondering if they’d try to charge her with fucking treason or something, a crime which could result in the death penalty. Of course, something like that would only be plausible if there was demonstrated evidence of an authoritarian, Tammany Hall-style political machine situation developing at the federal level with the tacit approval of the judicial branch. Good thing there’s no evidence of that happening, right?

    Which is to say, I think the folks in here whining about how she isn’t doing enough to fight fascism should maybe get off their pedestals a bit and have a little empathy for the position she had forced upon her by the ACTUAL villains in this story.




  • COULD be a big deal, assuming a lot of “ifs” wind up coming to pass. Nebraska awards it’s electoral college votes on a piecemeal basis. Each of the 3 congressional districts gets 1 vote awarded to the winner of the popular vote in that district, and 2 “at-large” electoral votes are given to the overall winner of the statewide popular vote. This has only been relevant in two elections, 2008 and 2020, when the second district (which is basically just the Omaha metropolitan area) awarded 1 blue vote among a sea of red. Now, the state Republican party (no doubt assisted by national) did their damnedest to try and make things Winner Take All to prevent this situation from occurring again, but were unable to court the votes necessary in the legislature prior to time running out. In fact, all around town I see folks with signs in their yards with either a 🔵 to represent our district, or a silhouette of the state all in red, to represent the electoral voice of this district being silenced (probably not how they look at it, but my biases are what they are).

    I’m too far removed from electoral news to understand exactly how this all shakes out, but there is a possible path to it being decided by a singular electoral college votes, and the influx of 100,000 potential voters with a possible (I’m speculating, but I don’t think it’s unreasonable) blue bias in primarily CD-1 and CD-2 could help secure that vote.


  • OP described something which conflicted with my direct, personal experience with that thing. I offered up my perspective. You responded with your perspective, based on your own anecdotal evidence. Yes, I could have run off to Google to fact check you and learn of all of the types of BFA that are out there. I chose not to. Why? Because we’re in the comment section of an article that has NOTHING to do with blank firing adapters. I assumed, and I guess you’re just going to have to forgive me for not researching in advance enough to not make this assumption, that, in responding to my post, you might be interested in further expounding upon the statements you made and answering questions I had about how your devices worked since they were clearly of a different design than what I had experienced. On the topic of assumptions, I was very clear that I was making an assumption so as to make it painstakingly obvious that I wasn’t trying to say you were WRONG ON THE INTERNET, but just that I wasn’t clear on how the device you were describing could be functional, given my previously stated understanding. I even attempted to reinforce that I wasn’t trying to invalidate your assertions by stating I was certain that wood tipped blanks were a real thing, I just had no personal experience with them.

    So, I dunno what to tell you man. I tried really hard to be as non-confrontational as possible in my comments. I’m tempted to say that I clearly failed in my ambition there, but no, I don’t think I will. You responded like a dick, and I think you ought to ask yourself what you’re doing in a discussion forum if your first response to a comment asking for you to clarify some of your statements is “fuck you, Google it.”


  • I’m a little confused by your response. Everything in my post was written from the perspective of firing the type of blank I described (no bullet, balsa wood or real) with the BFA attached. While I have had that type of blank cycle the weapon without a BFA attached, it’s the exception to the rule.

    Furthermore, would you clarify the use of these balsa wood bullets for me? Because, given my understanding of BFAs and what you described, I don’t see how those two concepts would work together. As you said, the principle behind BFAs is plugging the barrel so more gas is directed to the action, rather than our of the system. If you had a BFA fitted to a weapon that was firing blanks which were tipped with wood or some other fake projectile, my assumption would be the debris would collect in the end of the barrel behind the BFA post. Hell, that’s why we always hated training with blanks, it was always a nightmare to clean out the carbon buildup in the weapon after since none of it was expelled in the firing process like it would be in normal operation. Compacting a shit load of debris in the barrel of your weapon does not seem like it would be the intended outcome of a training event, but dumber shit has happened.

    I am sure that there are blanks (especially in the context of a Hollywood armory) which are designed in such away to more closely resemble real ammunition, I’ve just never worked with something of that ilk, and it doesn’t jive with my (limited) understanding of how firearms work.


  • That’s not really what BFAs do, at least not the models I’ve used. You seem to imply that weapons with BFAs fitted are still firing real rounds, which are rendered safe by hitting the adapter. That’s not true. They are firing blanks, which are cartridges with the bullet and some of the powder removed. Pull the trigger, you get a pop, a flash, and some smoke. Yay!

    Pull the trigger again though, and you’re very likely to have a misfire because the next round failed to feed from the magazine to the chamber. This is because most semi or fully automatic weapons use some of the energy of a fired round to cycle the action which expels the spent cartridge and feeds a fresh round into the firing chamber. When you fire a real bullet, it actually acts as something of a plug in the barrel for the very brief period of time it travels through it. This allows the pressure to overcome the resistance of the weapon’s action, and thus operate.

    When you fire a blank, there’s no bullet. No bullet means no plug, which means that all of the gas from the explosion just rushes right out the end of the barrel and is not enough to cycle the gun. This, you have to manually run the action, turning your scary big black assault rifle into a quaint bolt action rifle.

    So, how do you solve this problem? You make your own plug and stick it on the end of the barrel to redirect all of the energy through the weapon system rather than expelling it. That’s a all a BFA is, a metal post matched to the diameter of the barrel that screws into place to plug it. This has the additional positive of preventing anything from exiting the barrel accidentally while firing blanks, which is useful in the training contexts that you often see these devices, because you’re often “firing” on other people.

    If you were to use a BFA in the manner you describe, i.e. with a real bullet, you’re certainly going to damage the shit out of your weapon, and possibly wind up in the Emergency Room because you caught some metal splinters in the face when the end of your weapon exploded.